◆ Volume (length× width ×height):
             ·370mm×340mm ×1570mm
◆ Weight: about 90kg 　　
◆ Power supply voltage: AC220V±10% 　　
                 ·Frequency: 50HZ ~ 60 HZ
                 ·Power: 1500W
◆ Blood pump/spare pump:
          ·Flux: 15 ~ 340ml/min (Ф 6mm)
                     20 ~ 460 ml/min (Ф 8mm)
◆ Heparin pump:
    ·Flux: 0.1ml/h～10ml/h(±5%)   
    ·Precise: 0.1ml/h
    ·Injector size: 20ml/30ml/50ml
                           10ml/20ml/30ml
                            (selectable)
◆ Arterial pressure:
    ·display scope:-300mmHg～+300mmHg
                           (±10mmHg)
◆ Venous pressure:
    ·display scope:-50mmHg～+300mmHg
                           (±10mmHg)
◆ Dialysate flow:
    ·300ml/min～800ml/min linearity adjustable
                     (+10%)

                (-5%)
   ·Temperature:35.0℃~39.0℃
   ·Resolving rate:0.1℃
   ·Conductivity:13mS/cm~15.5mS/cm
                       (±0.1 mS/cm)

   ·Conductivity:13mS/cm~15.5mS/cm
                       (±0.1 mS/cm)

   ·Conductivity:13mS/cm~15.5mS/cm
                       (±0.1 mS/cm)

◆ UF flow scope: 0～1800ml/h(±30ml/h )
                          0～4000ml/h(optional)
◆ ISO UF flow scope:0～2000ml/h(±30ml/h)
◆ TMP
   ·Scope:-100mmHg～+600mmHg
                   (±20mmHg)
◆ Blood leakage monitor:
            ·over 1ml blood per liter dialysate
             (flow:500ml/min)
◆ Blood level monitor: ultrasonic sensor
◆ Air bubble monitor:
             ·Infrared and response threshold value:
             Single air bubble of 200 и I exists when
             Blood flux is 200ml/min
◆ Inflow pressure:0MPa～0.6MPa
◆ Inflow temperature: 5℃～30℃
◆ Environment temperature: 10℃～30℃,
               · Relative humidity≤70%
◆ Rinse/disinfection: chemical disinfection
    (citric acid,peracetic acid and oxalic acid)
◆ Hot rinse: 80℃
◆ Back-up power supply: last for 15-30min
    after electric-cut.

   Be applicable of hemodialysis treatment,hemoperfusion,Plasma Exchange,Pure ultrafiltration project.Touch screen was equipped and it can show Na＋and UF profiles;In addition,the functions ie.backup power supply, Kt/V,HCO3ˉ adjustment,single needle,acetate treatment,pyrogen filter port and net connection ect.are optional.

◆ Hemodialysis Therapy:same as JH-2000
◆ Pure ultrafiltration Therapy: same as JH-2000
◆ Hemoperfusion Therapy:same as JH-2000
◆ Plasma exchange Therapy:same as JH-2000
◆ Na＋and UF profiling:
  ·Be applicable for reducing the cases during dialysis treatment such as low/high pressure,muscle convulsion, headache,nausea,vomit ect.
◆ Kt/V function:
  ·The sufficiency of dialysis can be reflected by Kt/V.(Optional)
◆ HCO3 adjustment function:
  ·Be applicable for sericous acid toxicosis patient.
    Be capable to calibrate the acid toxicosis status according to patient's state of illness.(optional)
◆ Backup power-supply:
  ·It can last for 15-30 minutes after power cut off.
◆ Pyrogen filter port:
   Completely filtrating the remained bacteria and endotoxin.(optional)
◆ Net connection:
   One computer can audit and control the treatment of maximum 20 units hemodialysis machine (optional)